期刊论文

中文

化学工程师

1002-1124

2011

25

4

14-17

10.16247/j.cnki.23-1171/tq.2011.04.007

(2008CDA033):湖北省自然科学基金重点项目

本校为第一机构

以NiCl2.6H2O和Co（NO3）2.6H2O为原料,CO（NH2）2为沉淀剂,Al2O3为载体,采用均匀沉淀法制备了负载型双金属催化剂（Ni-Co/γ-Al2O3）。利用正交实验探讨了不同工艺参数对催化剂合成的影响,并得出了最佳制备工艺。实验得出的最佳工艺参数为：n（NiCl2.6H2O）/n（Co（NO3）2.6H2O）为4∶1,n（CO（NH2）2）/n（Ni2＋＋Co2＋）为6∶1,均匀沉淀反应的温度和时间分别为115℃和2.5h。同时运用XRD、SEM等分析手段对催化剂的物相结构和形貌进行了表征。结果显示催化剂外壳由复合的Ni-Co金属氧化物包裹,分散性良好,呈现多层立体结构。

The supported bimetallic catalysts（nano-Ni-Co/γ-Al2O3） were prepared by a homogeneous precipitation method involving an aqueous solution of nickel chloride hexahydrate,cobalt nitrate hexahydrate and urea,with alumina as the catalyst carrier.The effects of various technical parameters on the synthesis yield of catalysts were investigated and the optimum processing conditions were found through orthogonal experiments.The optimum processing conditions to prepare Ni-Co/γ-Al2O3 bimetallic catalysts were as follows： the molar ratio of nickel chl...