摘要：
Automatic dumpling forming machine is also called dumpling machine, which makes dumplings through mechanical motions. This paper adopts the stuffing delivery mechanism featuring the improved and specially-designed vane pump casing, which can contribute to the formation of dumplings. Its 3D modeling in Pro/E software, machining process planning, milling path optimization, simulation based on UG and compiling post program were introduced and verified. The results indicated that adoption of CAD/CAM offers firms the potential to pursue new innovative strategies.
期刊：
Applied Mechanics and Materials,2014年530-531:911-914 ISSN：1662-7482
作者机构：
[Liu D.W.; Yu N.H.; Li S.L.] School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan, 430023, China
关键词：
Finite element analysis;Pressing screw;Screw press
摘要：
Screw pressing technology provides a pressing process superior to those traditional ones. Screw press has been used in oil extraction with a long history, both for cold and hot pressing of vegetable oil materials. Pressing screw is the core component of screw press, as a very important working part, its strength is a precondition for ensuring normal operation of the whole machine. Considering the complexity and drawbacks of conventional analysis and check methods for pressing screw, a simplified three-dimensional model of which was set up, then finite element analysis was done, thus obtaining its continuous deformation and stress distribution with the results close to those from theoretical calculation. Hence, this method can be applied to rapidly and correctly find those dangerous positions and existing imperfections of its structure, thus providing valuable data to judge its structural rationality before practical manufacture, so as to make further improvements and optimizations for its structural design.
会议论文集名称：
Advances in manufacturing science and engineering
关键词：
Meat grinder;Perforated plate;FEA;ANSYS
摘要：
The grinder perforated plate with bone-removal systems has a unique design to improve the quality of ground meat. The pressure distribution on the grinder knife/plate interface during grinding of meat was investigated. The peripheral pressure on meat grinder plates during operation was greater than at the center thus hard particles are collected at the low pressure point. The mechanical models on the perforated plate surface created in MATLAB 7.0 for linear programming, and the 3D model of the perforated plate created in Pro/E software were imported into ANSYS 9.0 software and a linear static finite element analysis was performed. The visual deflection patterns the part experiences under "real world" loading conditions were obtained so as to complete the security check of strength.
会议名称：
3rd International Conference on Engineering Design and Optimization (ICEDO 2012)
会议时间：
MAY 25-27, 2012
会议地点：
Ningbo Univ, Shaoxing, PEOPLES R CHINA
会议主办单位：
Ningbo Univ
会议论文集名称：
Applied Mechanics and Materials
关键词：
ANSYS;FEA;Press casing;Screw press
摘要：
The pressing chamber is the heart of the screw press, it forms the drainage barrel and has to contain the operating forces of the press. As press casing is an integral part of pressing chamber, the strength of the press casing ensures normal operation of the press. The mechanical models of pressing chamber of the ZX10 type press created in MATLAB 7.0 for linear programming, and the 3D model of the press casing created in UG NX4.0 software were imported into ANSYS 9.0 software and a linear static finite element analysis was performed. The visual deflection patterns the part experiences under "real world" loading conditions were obtained so as to complete the security check of strength.
摘要：
Rotary meat grinders with bone chip removal facilities are advanced meat mincing machinery, characterized by undesirable hard-particle separation from ground meat during grinding operations. The grinder plate with an involute spiral groove to facilitate removal of hard particles is developed. The perforated plate with bone chips removal facilities has a unique design including catcher groove, bone-collection chamber and bone-removal passage. Its 3D modeling in Pro/E software, machining process planning, milling path optimization, simulation based on MasterCAM and compiling post program were introduced and verified. The results indicated that adoption of CAD/CAM offers firms the potential to pursue new innovative strategies.
摘要：
The service condition of plane thrust bearing of worm shaft in an oil screw press was analyzed. The fracture failure of the bearing rings was systematically investigated through physical-chemical test, trace inspection, fractographic appearance, and metallographic structure analysis. The results showed that a great amount of network surface cracks near bearing ring edge, some dot shaped internal oxidations and secondary crack initiation, higher hardness, as well as the network carbides and coarse quenching martensites led to the early brittle fracture of the bearing rings. The further improvements were normalizing and isothermal spheroidizing annealing can eliminate the network carbides and improve the microstructure in preheat treatment process, and quenching temperature and heating time can not be too high and long in final heat treatment. Hardness of the material is preferably 60-62 HRC.
