会议名称:
2nd International Conference on Optimization and Control (ICOCO)
会议时间:
DEC 07-09, 2015
会议地点:
Chongqing, PEOPLES R CHINA
会议主办单位:
[Jiang, Feng] Zhongnan Univ Econ & Law, Sch Math & Stat, Wuhan 430073, Peoples R China.^[Yang, Hua] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Peoples R China.^[Tian, Tianhai] Monash Univ, Sch Math Sci, Melbourne, Vic 3800, Australia.
关键词:
Ait-Sahalia-Rho model;Boundedness;Convergence in probability
摘要:
The Ait-Sahalia-Rho model is an important tool to study a number of financial problems, including the term structure of interest rate. However, since the functions of this model do not satisfy the linear growth condition, we cannot study the properties for the solution of this model by using the traditional techniques. In this paper we overcome the mathematical difficulties due to the nonlinear growth condition by using numerical simulation. Thus we first discuss analytical properties of the model and the convergence property of numerical solutions in probability for the Ait-Sahalia-Rho model. Finally, an example for option pricing is given to illustrate that the numerical solution is an effective method to estimate the expected payoffs.
期刊:
2017 29th Chinese Control And Decision Conference (CCDC),2017年:4648-4652 ISSN:1948-9439
通讯作者:
Zhao, Jiemei
作者机构:
[Zhao, Jiemei] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Hubei, Peoples R China.;[Hu, Zhonghui] 709th Res Inst China Shipbldg Ind Corp, Wuhan 430074, Hubei, Peoples R China.
通讯机构:
[Zhao, Jiemei] W;Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Hubei, Peoples R China.
会议名称:
29th Chinese Control And Decision Conference (CCDC)
会议时间:
MAY 28-30, 2017
会议地点:
Chongqing, PEOPLES R CHINA
会议主办单位:
[Zhao, Jiemei] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Hubei, Peoples R China.^[Hu, Zhonghui] 709th Res Inst China Shipbldg Ind Corp, Wuhan 430074, Hubei, Peoples R China.
会议论文集名称:
Chinese Control and Decision Conference
关键词:
Path following;AUV;Time-delay;Predictive
摘要:
A path following control problem of discrete-time autonomous underwater vehicle (AUV) with input delay is studied. For solving the time-delay in control system, an neural network (NN) predictive control method is introduced. Since the velocities are very difficult to be accurately measured, here output feedback method is employed to overcome this problem. The stability analysis is given by Lyapunov theorem. Simulation results show the effectiveness of the proposed control strategy.
摘要:
Notice of Violation of IEEE Publication Principles “Energy-aware Virtual Machine Management Optimization in Clouds” by Xiaoqing Zhang in 2017 3rd IEEE International Conference on Computer and Communications, December 2017, pp.2434-2438 After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE’s Publication Principles. This paper copied content from the paper cited below. The original content was copied without attribution (including appropriate references to the original author(s) and/or paper title) and without permission. “Optimal online deterministic algorithms and adaptive heuristics for energy and performance efficient dynamic consolidation of virtual machines in Cloud data centers” by Anton Beloglazov and Rajkumar Buyya in Concurrency and Computation: Practice and Experience, October 2011, pp.1397-1420 “Energy-aware resource allocation heuristics for efficient management of data centers for Cloud computing” by Anton Beloglazov, Jemal Abawajy, and Rajkumar Buyya in Future Generation Computer Systems, May 2011, pp.755-768 Cloud computing provides a kind of dynamic and scalable service on demand. However, clouds consume huge amounts of electrical energy. Meanwhile, delivering the negotiated QoS defined as Service Level Agreement (SLA) to users is necessary. A virtual machine placement strategy based on the equilibrium between energy and SLA is proposed. Aiming at dynamical changes of application workloads, an adaptive placement strategy RLWR based on robust local weight regression is presented, which decides the overload time of hosts dynamically according to the historical resource occupation of application workload. Then, two virtual machine migration selection algorithms, MPM and MNM are presented. The migrated virtual machines are deployed using bin-packing algorithm PBFDH. Contrasting to static algorithms such as STH, MPA and DVFS, virtual machines are not only deployed on fewer hosts in our algorithm, which promotes energy efficiency, but the load prediction can bring high-reliable QoS delivery and avoid overmuch SLA violations. Experimental results show that our strategy has an obvious effect on decreasing SLA violation under ensuring energy efficiency.
期刊:
PROCEEDINGS OF THE 2017 7TH INTERNATIONAL CONFERENCE ON MECHATRONICS, COMPUTER AND EDUCATION INFORMATIONIZATION (MCEI 2017),2017年75:467-470 ISSN:2352-538X
通讯作者:
Yuan, Cao
作者机构:
[Sun, Jianchi; Yuan, Cao] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Hubei, Peoples R China.
通讯机构:
[Yuan, Cao] W;Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Hubei, Peoples R China.
会议名称:
7th International Conference on Mechatronics, Computer and Education Informationization (MCEI)
会议时间:
NOV 03-05, 2017
会议地点:
Shenyang, PEOPLES R CHINA
会议主办单位:
[Sun, Jianchi;Yuan, Cao] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Hubei, Peoples R China.
会议论文集名称:
ACSR-Advances in Comptuer Science Research
关键词:
Feature extraction;Cotton leaf;Analyze and compare;Operator
摘要:
Cotton is the main plant of braided fabric in China, the production of cotton planting is important, but cotton are caused by diseases and insect pests easily in planting, so in the process of farming, some useful information of cotton diseases should be achieved easily and can be analyzed effectively, so some accurate and effective actions can be done. In the paper, cotton leaf as the research object, the main diseases are introduced, how to detect the main diseases is the important step in modern agricultural digital technology. In the paper, cotton leaf as the object of research, the main features of apple leafs should be reserved, and the special features of the disease region in apple leaf should be emphasized effective. The novel algorithm based on color components and edge extraction algorithms. More than 500 results of main cotton image with the main diseases can be compared by main operator algorithms and color components, analyze the results of different cotton diseases and operators, the new algorithm based on color difference and morphological features be precedence than other algorithms in the main cotton diseases.
摘要:
Convolutional Neural Network (CNN) has achieved remarkable progresses in hyperspectral image (HSI) classification. However, how to effectively implement spatial context that has been demonstrated to he useful for HSI classification is still an open issue. Existing CNNs for hyperspectral classification are restricted into a small scale due to small-scale inputs and limited training samples. Therefore, in this paper, two different methods are proposed to integrate both spatial context and spectral signature into CNN based HSI classification: I). fixed kernels in which weights are determined by prior information (e.g., mean, mean and standard deviation of pixels in a spatial neighborhood) and Gaussian kernel; 2). learnable kernels in which weights are learned from training samples, i.e., 2D learnable kernel, 3D convolutional kernel, and 2-Layer kernel. In the successive CNN for classification of HSI, dropout and batch normalization are also utilized to improve the classification performance of hyperspectral images under small sample conditions. Experimental results on two widely used HSI datasets demonstrate that integrating spatial context into a small scale CNN is useful to improve classification performance. It is also observed that fixed kernels are generally effective than learnable ones to explore spatial context, particularly for the cases with a small number of training samples.
作者机构:
[Zhao Jiemei] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Peoples R China.;[Hu Zhonghui] China Shipbldg Ind Corp, Res Inst 709th, Wuhan 430074, Peoples R China.
会议名称:
35th Chinese Control Conference (CCC)
会议时间:
JUL 27-29, 2016
会议地点:
Chengdu, PEOPLES R CHINA
会议主办单位:
[Zhao Jiemei] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan 430023, Peoples R China.^[Hu Zhonghui] China Shipbldg Ind Corp, Res Inst 709th, Wuhan 430074, Peoples R China.
摘要:
This paper deals with the problem of sliding mode control (SMC) for a class of singular systems with time-varying delay. A sliding mode controller is designed such that the singular system is exponentially admissible and in finite time the trajectory of singular system can be driven onto the sliding surface. By constructing a Lyapunov-Krasovskii functional and using the free-weighting matrix approach, the results on exponential stabilization are obtained in terms of strict linear matrix inequalities (LMIs). The derivative of the time-varying delay does not require to be smaller than one is a advantage of this paper. Finally, the effectiveness of the proposed main results is illustrated by a numerical example.
摘要:
This paper presents a multi-level project driven teaching mode in the "database application" course. The new teaching mode is based on the development and implementation of multiple projects. The projects involve the virtual management information system, real application system and business projects in enterprises. With the development of projects, there are great changes in the teaching contents and teaching process. Practical teaching is critical in the new teaching mode. Results show that the teaching mode motivates students' learning passion, increases their comprehensive abilities, and improves teaching efficiency.
摘要:
Fingerprint authentication is one of the most reliable and most widely used authentication methods. With the maturation of fingerprint recognition technology and the reducing cost of fingerprint reader, fingerprint authentication is more and more widely used in daily payment situation. This paper presents a new offline fingerprint payment system based on Artix-7 FPGA (XC7A35T-ICPG236C). This system provides a more secure and convenient payment solution by fingerprint payment instead of cash or IC card payment. This paper describes the integration of each modules of the system including fingerprint identification module, display module, and keyboard input module. The system provides a friendly user interface through a monitor showing the consume information. The keyboard operates the functions such as account management, recharge and consumption. Fingerprint module authenticates customer ID and thus completes the payment. The system is implemented purely on FPGA, which is more secure and efficient compared to traditional payment system.
摘要:
The web application performance testing is gaining wide attention due to popularization of Web application rapidly. To improve performance test efficiency, this paper chose domestic performance test tool PerformanceRunner to study, and presented one oriented-web performance test scheme based on PerformanceRunner. To illustrate PerformanceRunner how to carry out performance test, a CRM system was chosen as example to study. Test script and test scene were designed, and test result was analyzed. The test script was optimized with parameterization, transaction and rendezvous. The result shows that this scheme is an excellent choice for performance test engineer.
摘要:
With software's growing scale and complexity, software quality assurance has become the key problem facing the software industry. Thus, the significance of software testing cannot be understated. Automated testing technology is the primary method of software testing used enhance testing efficiency. In this paper, an automated test proposal based on AutoRunner and TestCenter is introduced. TestCenter manages the whole test process using the test requirements and testing plan. Moreover, AutoRunner enhances test script reusability by means of parameterization and the use of checkpoints. Finally, the automated test scheme is introduced with a tested CRM system.
摘要:
Meeting users’ Quality of Service (QoS) requirements is a key problem of tasks scheduling in cloud computing. A cloud tasks scheduling algorithm CTS_QoS based on maximal QoS satisfaction and minimal QoS distance between tasks and resources is presented in this paper. Under meeting maximal QoS satisfaction of user’s tasks, CTS_QoS can select the resources with minimal QoS distance to map. Experimental results show that though CTS_QoS cannot guarantee a high resource utilization, it can gain users’ QoS satisfaction maximization.
会议名称:
8th International Conference on Intelligent Human-Machine Systems and Cybernetics (IHMSC)
会议时间:
SEP 11-12, 2016
会议地点:
Zhejiang Univ, Hangzhou, PEOPLES R CHINA
会议主办单位:
Zhejiang Univ
会议论文集名称:
International Conference on Intelligent Human-Machine Systems and Cybernetics
关键词:
segmentation;active contour;smoothing parameter;edge information
摘要:
Active contour model is one of the most popular image segmentation frameworks. Conventional active contour model requires the empirical adjustment of smoothing parameter in energy functional and the smoothing parameter for active contour is a challenging problem. In this paper, we propose an automated adjustment method for the smoothing parameter in region-based active contour models and thus a full automated segmentation method is obtained. In proposed active contour model, the region term is the same as that in traditional region-based active contour model, whereas the prior term in traditional region-based active contour model is substituted by gray statistic of edge image on the contour. Thus the evolution of contour has the same iteration form as that in traditional region-based active contour model. But a driving force from the edge information takes the role of smoothing term and the adjustment of smoothing parameter is avoided. Experimental results show the proposed model can obtain segmentation quality comparable to the those obtained by traditional region-based active contour model, without the cumbersome trial of smoothing parameter.
作者机构:
[Liu, Jianguo; Yang, Hua] Huazhong Univ Sci & Technol, Sch Automat, Wuhan, Hubei, Peoples R China.;[Yang, Hua] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Hubei, Peoples R China.;[Jiang, Feng] Zhongnan Univ Econ & Law, Sch Stat & Math, Wuhan, Hubei, Peoples R China.
会议名称:
7th International Conference on Intelligent Control and Information Processing (ICICIP)
会议时间:
DEC 01-04, 2016
会议地点:
Siem Reap, CAMBODIA
会议主办单位:
[Yang, Hua;Liu, Jianguo] Huazhong Univ Sci & Technol, Sch Automat, Wuhan, Hubei, Peoples R China.^[Yang, Hua] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Hubei, Peoples R China.^[Jiang, Feng] Zhongnan Univ Econ & Law, Sch Stat & Math, Wuhan, Hubei, Peoples R China.
关键词:
locally exponential stability;jump-diffusion systems with parameter;mild solution
摘要:
Stochastic jump systems have great potential in finance engineering and stochastic control. In this paper, we mainly consider stability of stochastic jump-diffusion systems with parameter. We establish the criteria of locally exponential stability of mild solutions of the systems by using stochastic integral inequalities technique. We extend some existing results to more general cases. Finally, we use an example to show our result.
作者机构:
[Ding, Yue-Hua] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Peoples R China.;[Xiang, Ri-Hua] Beijing Special Engn Design & Res Inst, Beijing, Peoples R China.
会议名称:
International Conference on Computer Engineering and Information System (CEIS)
会议时间:
NOV 12-13, 2016
会议地点:
Shanghai, PEOPLES R CHINA
会议主办单位:
[Ding, Yue-Hua] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Peoples R China.^[Xiang, Ri-Hua] Beijing Special Engn Design & Res Inst, Beijing, Peoples R China.
会议论文集名称:
ACSR-Advances in Comptuer Science Research
关键词:
software testing management;TestCenter;bug track;test requirement;test plan
摘要:
Software quality is very important for software, and software test is an important method of software quality assurance. This paper provided one scheme for software testing management based on TestCenter. This research applied TestCenter to manage the tests process. The software testing process focused on test requirements, test plans, test execution and bug trace, which can ensure test cases to fully coverage the test requirement in theory and trace bug in real time. Our practice proves that the scheme can shorten cost time of test project effectively.
作者机构:
[Li, Yaqin; Gong, Cheng; Yuan, Cao] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Peoples R China.
会议名称:
6th International Conference on Electronic, Mechanical, Information and Management Society (EMIM)
会议时间:
APR 01-03, 2016
会议地点:
Shenyang, PEOPLES R CHINA
会议主办单位:
[Li, Yaqin;Yuan, Cao;Gong, Cheng] Wuhan Polytech Univ, Sch Math & Comp Sci, Wuhan, Peoples R China.
会议论文集名称:
ACSR-Advances in Comptuer Science Research
关键词:
Online-teaching;PCI;FPGA;DSP
摘要:
These online-teaching database systems are generated from online transactions, emails, videos, audios, images. They are stored in databases grow massively and become difficult to capture, form, store, manage, share, analyze and visualize via typical database software tools. The adventure of large amount of data and real-time requirements presents great challenges using traditional desktop computers. In this paper, to tackle the specific problem with a critical requirement of 10ms for whole data processing pipeline, we proposed a high performance embedded system as opposed to personal computer. Peripheral Component Interconnect (PCI) for data transferring from computer to Field Programmable Gate Array (FPGA) is proposed to solve the problem, and a custom-designed dual-port dual-channel RAM to realize simultaneous data exchange and data processing which was implemented using a 6-core Digital Signal Processor (DSP). The hardware system was designed and tested the performance of individual modules as well as the integration of them as a whole. We reported a total time using such pipeline of 7.5ms, meeting the critical requirement and demonstrating its feasibility in practical application.